Penguin Cold Therapy Chiller with Filter Kit
Cold therapy is a great way to boost your health, wellness, and performance. But it can also be a hassle to keep your tub filled with ice and cold water. That’s why we created the Tub Chiller, a device that cools your water without any ice needed. With the Tub Chiller, you can enjoy the benefits of cold therapy anytime, anywhere, and with minimal effort.
How It Works
The Tub Chiller is a compact and powerful device that connects to your tub and circulates cold water through it. It can lower the water temperature to as low as 40°F (4°C), depending on the ambient conditions and the size of your tub. You can adjust the temperature to your preference using the digital controller. The Tub Chiller can be used with any tub that holds up to 100 gallons (378 liters) of water. It works both indoors and outdoors, as long as the temperature is above freezing.
Why You’ll Love It
The Tub Chiller has many advantages over using ice for cold therapy, such as:
-
Convenience: No more buying, storing, or hauling ice. Just fill your tub with water, plug in the Tub Chiller, and enjoy your cold therapy session.
-
Consistency: No more worrying about the water getting too warm or too cold. The Tub Chiller maintains the temperature you set, so you can get the optimal results from your cold therapy.
-
Cost-effectiveness: No more spending money on ice or electricity. The Tub Chiller only uses power when it needs to cool the water, which is much less than running a freezer or an air conditioner. The average monthly cost of operation is only $18-$28 (based on $0.12/KWh).
-
Cleanliness: No more dealing with bacteria, algae, or slime in your tub. The cold water inhibits the growth of microorganisms, which means you can keep your water clean for longer periods of time. You’ll also need less sanitizer and fewer water changes.
Frequently Asked Questions
- Can I use a timer to turn the Tub Chiller on and off?
We recommend keeping the Tub Chiller on at all times, for the following reasons:
- It keeps the water cold and ready for use whenever you want.
- It prevents the water from getting contaminated by microorganisms, which can cause health issues and damage the Tub Chiller.
- It prolongs the life of the pump, which can wear out faster if it is turned on and off frequently.
Using a timer will not save you much money on electricity, and it may cost you more in the long run due to maintenance and replacement costs.
- How do I set up the Tub Chiller?
The Tub Chiller is easy to set up, as long as you follow these steps:
- Place the Tub Chiller near the drain of your tub, and make sure the bottom of the Tub Chiller is at the same or lower level than the bottom of your tub. Do not elevate the Tub Chiller above the tub, as this will prevent the water from flowing properly.
- Connect the inlet hose from the Tub Chiller to the drain of your tub, and the outlet hose from the Tub Chiller to the side of your tub. Make sure the hoses are not too long or kinked, as this will reduce the water flow and the cooling efficiency.
- Fill your tub with water, and plug in the Tub Chiller. Turn on the power switch, and set the desired temperature using the digital controller. Wait for the Tub Chiller to cool the water to your preference, and enjoy your cold therapy session.
Chiller Specs:
- 3/4HP High Efficiency Chiller
- 7,500 BTU/hr
- 56 dBA (fairly quiet)
- 110 – 120 Volts / 450 Watts / 3.9 Amps
- 17”W x 15”D x 13”H
- 49 Pounds
- Built in Pump
- 10' power cord with GFCI protection
- Rain Proof* (*disconnect chiller and drain completely when ambient temps are freezing or below to prevent damage to chiller)
- 1 Year Product Warranty
- Proudly made in the USA
